》KTV智能灯光
KTV动感灯光系列
BC智控系列
KTV激光灯系列
投影灯系列包房灯光
KTV派对灯光系列
》瑞典 LAB.GRUPPEN
FP+ Series系列
FLM Series系列
》德国 CAMCO
VORTEX系列
TECTON系列
Q-POWER系列
D-POWER系列
远程控制方案
》CREDIT AUDIO
VERA20 S32双喇叭线阵低音
VERA 20双十寸全频线阵
》德国 DYNACORD
Loudspeaker Systems
DYNACORD Cobra-2 Systems
DYNACORD Cobra-4 Systems
Loudspeakers
D-Lite系列
Variline系列
Powered Mixers
PowerMate3系列
Power Amplifiers
Power H系列
SL系列
》加拿大 Collocation
线声源阵列
CT Evolution系列
CL-H.Evolution系列
CF+Evolution系列
》数字音频处理器
APEX
LAKE
XTA
Collocation
ASHLY
FAMOUSOUND
》调音台系列
MIDAS
Analogue Mixing Consoles VENICE系列
PRO Series Live Audio System
DYNACORD
POWERMATE1000-3系列
PreSonus
StudioLive系列
ALLEN&HEATH
SOUNDCRAFT
MACKIE
YAMAHA
MGP 系列
MG 系列(XU型号)
MG 系列(标准型号)
MG 系列(停产型号)
数字调音台 系列
》FAMOUSOUND蜚声功放
SAE Voice series
SAE Voice 7000
SAE Voice 9000
8000T系列
MAs系列
MA系列
9000系列
FAMOUSOUND四通道功放
FAMOUSOUND蜚声周边设备
》SOUNDSTANDARD 声准功放
SOUNDSTANDARD KH系列
SOUNDSTANDARD GB系列
SOUNDSTANDARD G系列
SOUNDSTANDARD LA系列
SOUNDSTANDARD MC系列
SOUNDSTANDARD LS系列
SOUNDSTANDARD CA系列
SOUNDSTANDARD 2008i声准时序电源器
SOUNDSTANDARD PRO1018B声准时序电源器
SOUNDSTANDARD PRO3231FB声准均衡器
SOUNDSTANDARD 1048B声准音频分配器
》专业音响配套设备
》专业无线话筒系统
SHURE(舒尔)
Ⅰ.手持式
Ⅱ.领夹式
Ⅲ.头戴式
SENNHEISER(声海塞尔)
Ⅰ.手持式
Ⅱ.领夹式
Ⅲ.头戴式
》KTV卡包音箱
MagneTurbo
》KTV合并功放
》KTV无线话筒系统
台湾Hiteng无线话筒
MagneTurbo 无线话筒系统
》专业舞台灯光
LIGHT SKY
大黄蜂光束灯
OUTMAR
电脑摇头灯
电脑灯控台
常规灯
》KTV点歌系统
雷石单机版
星网视易EVIDEO点歌系统
雷石网络版
雷石雷客点歌系统
雷石触摸屏
》卡拉OK前级效果器
加拿大Collocation前级效果器
MagneTurbo 磁能动力前级效果器
bd-Audio 前级效果器
地址:北京市朝阳区十里河灯饰城工程灯大楼B座B1-1010
联系电话:010-66551698
传真:010-66163966
网址:www.bthl.com.cn

产品展示首页 > 产品展示 > 》数字音频处理器 > APEX

APEX Intelli-X 2 48

 APEX Intelli-X 2 48

 

Intelli-X 2 48 
System management - 4 inputs x 8 outputs
 
 
APEX Intelli-X 2 48
 
 
Intelli-X 2 48
Featuring internal processing up to 192 kHz as standard, high-end studio-grade analogue circuit designs and mastering-grade compressors, the new Intelliseries sets the new benchmark in system management and speaker processing design. Whether the application is for a standalone system controller or crossover, configured using front panel controls, or a comprehensive wireless networked system for Stadium or Arena sized tours, the Intelli-X² is designed to provide the solution that our clients demand. With a comprehensive preset library provided as standard, implementing the Intelli-series into your system couldn't be easier.
Designed to be Plug-and-Play, the Intelli-X² is simple to configure and integrate into any network. Whether the application is for a standalone system controller or crossover, configured using front panel controls, or a comprehensive wireless networked system for Stadium or Arena sized tours, the Intelli-X² is designed to provide the solution that our clients demand.
With a comprehensive preset library provided as standard, implementing the Intelli-series into your system couldn't be easier. Reliability hasn't taken a back seat either. Comprehensive test procedures including vibration and thermal tests, extended soak testing and the use of high reliability power supplies all ensure that the Intelli-X² is as reliable as possible against the rigors of life on the road.
The new Intelli-series consists of two system management devices, Intelli-X² 26 (2 in, 6 out) and Intelli-X² 48 (4in, 8 out), providing all the system management tools necessary for comprehensive system alignment and EQ, through to the provision of IIR and FIR based crossovers.
The new Intelli-series comprises a no-compromise design resulting in unmatched audio performance, even when using lower sample rates. The internal processing is selectable from 44.1 kHz to 192 kHz, providing full compatibility with both standard and high-end sample rate formats. Sample rate convertors are provided on the inputs as standard and may be switched in and out of circuit as required, enabling digital equipment operating at different rates to be connected.
A high degree of sonic quality in the analogue domain is also attained based on a no-compromise design philosophy. The new Intelli-series is equally at home in both live and studio applications. Intelli-X² I/O can be selected (in pairs) to be either analogue or AES3/EBU, enabling a mix of audio formats to be used simultaneously. Comprehensive front panel control means that reliance on computers to configure or tweak parameters is a thing of the past.
An exceptionally intuitive front panel, with integral LCD menu (using graphical icons similar to those used on many smartphones) makes operation of the Intelli-X² extremely quick to learn.
Critical attention has been focussed on synchronisation. Four sync options are available: Wordclock, AES A/B, AES C/D and internal. The Intelli-X² series manages synchronisation by providing a three-tiered redundancy approach, ensuring that if any sync source is lost, the Intelli-X² will automatically revert to another (as defined by the user) ensuring no loss in audio.
An integral date and time-based logging system is incorporated within all Intelli-devices. The log provides details of any key configuration/ control changes made and this log is available for viewing on the front panel display, or can be downloaded directly onto a computer.
The Intelli-series is designed to interface easily into any existing (or bespoke) Ethernet network via internal 3-way Ethernet switches. Both automatic IP (DHCP) and static IP configuration is provided as standard, enabling plug & play connectivity and more rigid IP assignments for use in fixed installations. SNMP support also provided. Wireless access points can be directly connected to Intelli-X² devices allowing direct control over a wireless network.
 
 
Specifications

Balanced line level inputs
Connectors: 3-pin XLR (software switch-able between analog and AES-3)
Type: electronically balanced
Impedance: >10k ohms, balanced
Common mode rejection: >90dB
Max input level: 18, 21, 24 or 27 dBu software selectable, balanced, 1% THD+N
Frequency response: 20 Hz - 20 kHz, ±0.5 dB
THD+N: less than 0,005%, +4 dBu, 20Hz- 20 kHz, 22 kHz BW
Dynamic range: 120 dB, 20 Hz to 20kHz, un-weighted at +21dBu headroom settings
Crosstalk: >90 dB
AD conversion: 24-bit, sigma-delta
Balanced line level outputs
Connector: 3-pin XLR (software switch-able between analog and AES-3)
Type: electronically balanced
Impedance: <50 ohms, balanced
Max output level: 15, 18, 21, 24 dBu software selectable, into 600 ohms, balanced, 1%
THD+N
Frequency response: 20 Hz - 20 kHz, ±0.5 dB
THD+N: less than 0,005%, +4 dBu, 20Hz- 20 kHz, 22 kHz BW
Dynamic range: 120 dB, 20 Hz to 20kHz, un-weighted at +21dBu headroom settings
Crosstalk: >90 dB
DA conversion resolution: 24-bit
AES-3 inputs
Connector: 3-pin XLR (software switch-able between analog and AES-3)
Type: transformer isolated
Impedance: 110 ohms or 75 ohms selectable (internal jumper), balanced
Supported formats: AES-3 and SPDIF up to 24-bit
Supported sample rates: 32 to 192 kHz
AES-3 outputs
Connector: 3-pin XLR (software switch-able between analog and AES-3)
Type: transformer isolated
Impedance: 110 ohms or 75 ohms selectable (internal jumper), balanced
Word-clock input
Connector: BNC
Termination: 75 ohms switch-able
Input level: 1 to 10 Vpp
Word clock output
Connector: BNC
Impedance: 75 ohms
Output level: TTL 5 Vpp
Digital processing
Sample rate: 44,1kHz, 48kHz, 88,2kHz, 96kHz, 176,4kHz or 192kHz selectable
Internal processing: 32-bit floating point
Input / output channel: Intelli-X² 26: 2 in x 6 out
Intelli-X² 48: 4 in x 8 out
Network remote control
Built-in Ethernet switch: IEEE 802.3 10Base-T/100Base-TX
Connectors: 3 x Neutrik EtherCon, Auto MDI-MDIX
Protocol: Proprietary UDP/IP based, SNMP
RS-232
Connector: D-sub 9-pin female
Mains
Connector: Neutrik PowerCon
Voltage: Auto-detect 100-240 Vac (+/- 10 %) - 50-60 Hz
Power consumption: Intelli-X² 26 < 60 VA
Intelli-X² 48 < 60 VA
Input channels functions
Gain: -80 to +15dB, 0,1dB steps
Polarity: normal / inverted
Delay:
Duration: 0 to 1500ms, sample rate depend steps,
Distance: 0 to 500m
Temperature: -20 to 50°C, 0,1° steps
Relative humidity: 0 to 100%, 1% steps
GEQ: 30-band ISO centred, +/-15 dB, proportional-Q or constant-Q mode
selectable
PEQ:
Bands 12
Filter types: Bell-Symmetrical, Bell-Asymmetrical, Notch, Low-Shelving 6dB/oct, Low-
Shelving 12dB/oct, High-Shelving 6dB/oct , High-Shelving 12dB/oct, All-
Pass 90°, All-Pass 180°, High-Pass 6dB/oct, High-Pass 12dB/oct, High-Pass
Vari-Q 12dB/oct, Low-Pass 6dB/oct, Low-Pass 12dB/oct, Low-Pass Vari-Q
12dB/oct, Band-Pass
Frequency: 10Hz to 22kHz, 0,1Hz steps
Gain: -40 to +15dB, 0,1dB steps (when applicable)
Q: 0,1 to 48, 0,01dB steps (when applicable)
Compressor:
Threshold: -80 to 0dBfs, 0,1dB steps
Ratio: 1:1 to 50:1, 1 steps
Knee: hard or soft
Attack time: 0,5 to 100ms, 0,1ms steps
Release time: 5 to 5000ms, 0,1ms steps
Side-chain mode: flat, high-pass or band-pass mode
Make-up gain: -20 to +20dB, 0,1 steps
Mix matrix functions
Gain: -80 to +15dB, 0,1dB steps
Routing: enabled/disabled
Output channel functions
Delay:
Duration: 0 to 1500ms, sample rate depend steps,
Distance: 0 to 500m
Temperature: -20 to 50°C, 0,1° steps
Relative humidity: 0 to 100%, 1% steps
Driver alignment:
Duration: 0 to 30ms, sample rate depend steps,
Distance: 0 to 10000cm, 0,1cm steps
Temperature: -20 to 50°C, 0,1° steps
Relative humidity: 0 to 100%, 1% steps
PEQ:
Bands 12
Filter types: Bell-Symmetrical, Bell-Asymmetrical, Notch, Low-Shelving 6dB/oct, Low-
Shelving 12dB/oct, High-Shelving 6dB/oct , High-Shelving 12dB/oct, All-
Pass 90°, All-Pass 180°, High-Pass 6dB/oct, High-Pass 12dB/oct, High-Pass
Vari-Q 12dB/oct, Low-Pass 6dB/oct, Low-Pass 12dB/oct, Low-Pass Vari-Q
12dB/oct, Band-Pass
Frequency: 10Hz to 22kHz, 0,1Hz steps
Gain: -40 to +15dB, 0,1dB steps (when applicable)
Q: 0,1 to 48, 0,01dB steps (when applicable)
High-pass and low-pass crossover:
Filter types: Butterworth 6 to 48dB/octave, 6dB steps
Linkwitz-Riley 12 to 48dB/octave, 12dB steps
Bessel 12 to 48dB/octave, 6dB steps
Frequency: 10Hz to 20kHz, 0,1Hz steps
FIR filters:
At 48 kHz: 5 x 1024 taps or 8 x 512 taps
At 96 kHz: 3 x 1024 taps or 8 x 512 taps
Gain: -80 to +15 dB, 0,1 dB steps
Polarity: normal / inverted
Limiter:
Type: Dual-stage, RMS + Peak limiter
RMS threshold: -80 to 0 dBfs (or dBu equivalent), 0,1 dB steps
Peak threshold: -80 to 0 dBfs (or dBu equivalent), 0,1 dB steps
RMS attack: 0,5 to 100 ms, 0,1 ms steps
Peak attack: 0ms
Release: 5 to 10000 ms, 0,1 ms steps
Environment
Operating
Temperature: 0° to 50° C
Relative humidity: 10 to 60 %, non-condensing
Storage
Temperature: -20° to 70° C
Mechanical specifications
Dimensions
Unit
Width: 483 mm (19-inch)
Height: 43,6 mm (1,75-inch - 1U)
Depth: 286 mm
Package
Width: 575 mm
Height: 110 mm
Depth: 355 mm
Weight
Unit (Nett): Intelli-X² 26 3,75 kg
Intelli-X² 48 3,75 kg
Package (Shipping): Intelli-X² 26 5,5 kg
Intelli-X² 48 5,5 kg

 

Copyright © 2011 DYNACORD,Collocation,FAMOUSOUND官网 All Rights Reserved.  客服
 
客服
客服
客服
电 话:010-66551698
    京ICP备11024992号-1