》KTV智能灯光
KTV动感灯光系列
BC智控系列
KTV激光灯系列
投影灯系列包房灯光
KTV派对灯光系列
》瑞典 LAB.GRUPPEN
FP+ Series系列
FLM Series系列
》德国 CAMCO
VORTEX系列
TECTON系列
Q-POWER系列
D-POWER系列
远程控制方案
》CREDIT AUDIO
VERA20 S32双喇叭线阵低音
VERA 20双十寸全频线阵
》德国 DYNACORD
Loudspeaker Systems
DYNACORD Cobra-2 Systems
DYNACORD Cobra-4 Systems
Loudspeakers
D-Lite系列
Variline系列
Powered Mixers
PowerMate3系列
Power Amplifiers
Power H系列
SL系列
》加拿大 Collocation
线声源阵列
CT Evolution系列
CL-H.Evolution系列
CF+Evolution系列
》数字音频处理器
APEX
LAKE
XTA
Collocation
ASHLY
FAMOUSOUND
》调音台系列
MIDAS
Analogue Mixing Consoles VENICE系列
PRO Series Live Audio System
DYNACORD
POWERMATE1000-3系列
PreSonus
StudioLive系列
ALLEN&HEATH
SOUNDCRAFT
MACKIE
YAMAHA
MGP 系列
MG 系列(XU型号)
MG 系列(标准型号)
MG 系列(停产型号)
数字调音台 系列
》FAMOUSOUND蜚声功放
SAE Voice series
SAE Voice 7000
SAE Voice 9000
8000T系列
MAs系列
MA系列
9000系列
FAMOUSOUND四通道功放
FAMOUSOUND蜚声周边设备
》SOUNDSTANDARD 声准功放
SOUNDSTANDARD KH系列
SOUNDSTANDARD GB系列
SOUNDSTANDARD G系列
SOUNDSTANDARD LA系列
SOUNDSTANDARD MC系列
SOUNDSTANDARD LS系列
SOUNDSTANDARD CA系列
SOUNDSTANDARD 2008i声准时序电源器
SOUNDSTANDARD PRO1018B声准时序电源器
SOUNDSTANDARD PRO3231FB声准均衡器
SOUNDSTANDARD 1048B声准音频分配器
》专业音响配套设备
》专业无线话筒系统
SHURE(舒尔)
Ⅰ.手持式
Ⅱ.领夹式
Ⅲ.头戴式
SENNHEISER(声海塞尔)
Ⅰ.手持式
Ⅱ.领夹式
Ⅲ.头戴式
》KTV卡包音箱
MagneTurbo
》KTV合并功放
》KTV无线话筒系统
台湾Hiteng无线话筒
MagneTurbo 无线话筒系统
》专业舞台灯光
LIGHT SKY
大黄蜂光束灯
OUTMAR
电脑摇头灯
电脑灯控台
常规灯
》KTV点歌系统
雷石单机版
星网视易EVIDEO点歌系统
雷石网络版
雷石雷客点歌系统
雷石触摸屏
》卡拉OK前级效果器
加拿大Collocation前级效果器
MagneTurbo 磁能动力前级效果器
bd-Audio 前级效果器
地址:北京市朝阳区十里河灯饰城工程灯大楼B座B1-1010
联系电话:010-66551698
传真:010-66163966
网址:www.bthl.com.cn

产品展示首页 > 产品展示 > 》瑞典 LAB.GRUPPEN > FLM Series系列

LAB.GRUPPEN FLM10000Q

 LAB.GRUPPEN FLM10000Q

LAB.GRUPPEN FLM10000Q front

 

 

LAB.GRUPPEN FLM10000Q rear

LAB.GRUPPEN FLM10000Q rear

 

 

 LAB.GRUPPEN FLM10000Q rear

LAB.GRUPPEN FLM10000Q rear

  • Lab.gruppen的PLM系列完美融合了来自两家演出领域的顶尖厂商——Lake®和Lab.gruppen的技术;
  • 低频表现出色,能重现低至45Hz的音频;安装灵活;
  • 每一台PLM功放都内置了突破性的Lake处理技术——灵活性和声音品质的全球标准;FP+系列功放平台的强大的功率,纯净的音质,以及可靠性;
  • 这些具有互补性的技术智能地融合在一起,为扬声器系统提供了一整套完整的驱动系统,包括:分频,延时,均衡,限制,音频网络和功率放大;
  • PLM系列革命性的负载检查和性能监测功能保证了系统中所有部件的可靠性——包括扬声器;

 

 

 
 

 

PLM 10000Q Powered Loudspeaker Management system The two- input, four- output PLM 10000Q seamlessly integrates ▸ networked digital signal distribution, drive processing, power amplification, and load verification plus performance monitoring in a single hardware unit and unified software controller. This new approach, designated Powered Loudspeaker Management (PLM), is a cohesive blend of Lake® Processing and Lab.gruppen power. As a complete system, the PLM 10000Q affords significant benefits when compared to conventional approaches utilizing separate components.

 

Lab.gruppen Technology

 

▸▸ 2350 W per channel @ 2 ohms**
▸▸ 2300 W per channel @ 4 ohms**
▸▸ 2U chassis weighing only 13.5 kg (30 lbs)
▸▸ Class TD® output stage
▸▸ Regulated Switch Mode Power Supply (R.SMPS™)
▸▸ Copper-finned Intercooler® with transverse-mounted output
devices
▸▸ Full suite of protection and fault monitoring features
▸▸ Comprehensive loudspeaker preset database
▸▸ LoadLibrary™ load “Fingerprint” (identity and characteristics) data
▸▸ Comprehensive LoadSmart™ load verification and SpeakerSafe™
continuous loudspeaker performance monitoring
▸▸ Dante™ low-latency digital network included as standard
▸▸ Fully compatible with Dolby Lake Processor, Lake Contour™,
and Lake Mesa Quad EQ™ and Mesa Parametic EQ™ devices
▸▸ Primary and secondary network connections (for daisy chaining or
system redundancy)
▸▸ Digitally controlled ”amplifier gain” adjustable in 0.1 dB steps from
22 to 44 dB
▸▸ Digital output attenuation in 0.25 dB steps from -inf to 0 dB
▸▸ Binding post or Neutrik® Speakon® (1 x NLT8, 2 x NLT4) power
output connectors
▸▸ Digitally implemented, zero-overshoot Inter-Sample Voltage Peak
Limiting (ISVPL™) adjustable in 0.1 V steps from 17.8 to 153 V
▸▸ Power Average Limiter (PAL)
▸▸ High-brightness front-panel LCD display
▸▸ Moisture resistant silicone touchpad for front-panel display mode
selection and menu navigation
 
 
Specifications PLM 10000Q
General
Number of input channels 2
Number of output channels 4
Peak total output all channels driven 10800 W
Max. Peak output voltage per channel 153 V
Max. output current per channel 50 A peak
Max. Output Power 2 ohms 4 ohms 8 ohms 16 ohms
All channels driven 2350 W 2300 W 1300 W 660 W
Channels 1 and 2, while channels 3 and 4 are driven at -3 dB 2) 2350 W 2400 W 1300 W 660 W
All channels driven into optimal impedance interval > 2700 W into 2.4 – 3.2 ohms
Audio Performance
THD + N 20 Hz - 20 kHz for 1 W <0.05%
THD + N at 1 kHz and 1 dB below clipping <0.04%
Dynamic range with digital inputs (for all supported sample rates) >116 dB
Dynamic range with analog inputs >114 dB
Frequency response (1 W into 8 ohms, 20 Hz - 20 kHz) + /-0.05 dB
Input Common Mode Rejection (CMR) 20 Hz to 1 khz > 78 dB
Internal sample rate 96 k
Internal data path 32 bit floating point
Product propagation delay, best case (96 kHz AES) 1.61 ms
Product propagation delay, analog input 1.68 ms
Sample Rate Converters
THD + Noise 0.00003 %, 20 Hz - 20 kHz, unweighted
Analog to Digital inputs
THD + Noise 0.00022 %, typical at 1 kHz unweighted at +26 dBu headroom setting
0.00033 %, typical at 20 Hz and 20 kHz unweighted at +26 dBu headroom setting
AES / EBU inputs
Supported resolutions ≤ 24 bit
Supported sample rates 44.1, 48, 88.2, 96, 176.4, 192 kHz
Dante Audio Network
Supports redundant paths Yes
Flexible topology Yes
Network latency 0.8, 1.3 and 4 ms
Device presets
Local memory locations for the settings of the product 100
Limiters
Adjustable Inter-Sample Voltage Peak Limiter (ISVPL) 17.8 - 153 V, step size 0.1 V
Current Peak Limiter < 300 ms 49 A peak
Current Average Limiter (CAL) > 300 ms 25 Arms
LimiterMax (rms and peak limiters)
– MaxRMS (rms voltage limiter) Yes
– MaxPeak (peak voltage limiter) Yes
Gain
Amplifier gain 22 - 44 dB, step size 0.1 dB
Analog attenuator -Inf to 0 dB, step size 0.25 dB
Back panel interface
AES / EBU / I/O (input + link) 2 x 3-pin XLR
Analog, 2-channel I/O (input + link) 4 x 3-pin XLR, electronically balanced
Output connectors Neutrik Speakon (1 x NLT8, 2 x NLT4) or 4 Binding Posts (pairs) (must be specified upon order)
Auto 10/100, Auto Uplink 2 x RJ45 EtherCon
Control and monitoring interface Via Ethernet for Lake Controller software
Detachable mains cord Neutrik PowerCon 32 A
Cooling Two fans, front-to-rear airflow, temperature controlled speed
Front-panel user interface:
Display, daylight readable LCD 2.5 inch
Fault/Warning/Limit/Clip indicators RGB LEDs
Mute and soft function buttons 8 provided
Standby Power button On/Off
Mute Enable button Enables muting of outputs and inputs via soft-button keypad
Meter button Toggles through meter views
Menu button Provides a menu driven interface for full function front panel control
Rotary Encoder Yes
Exit button Provides a “back” function
Power
Operating voltage, 230 V / 115 V nominal 1) 140-265 V / 70-135 V (45 - 66 Hz)
Soft start / Inrush Current Draw Yes / max. 5 A
Mains Power Average Limiter (PAL) Yes
Dimensions (W/H/D) W: 483 mm (19”), H: 88 mm (2 U), Overall D: 470 mm (18.5”) deep including handles and rear support.
Weight 13.5 kg (30 lbs.)
Finish Black painted steel chassis with black painted steel / aluminum front
 

 

Copyright © 2011 DYNACORD,Collocation,FAMOUSOUND官网 All Rights Reserved.  客服
 
客服
客服
客服
电 话:010-66551698
    京ICP备11024992号-1